Fa'idodin tattalin arziƙin amfani da takardan jefar don yin fata na wucin gadi da fata na roba sune kamar haka:
1.Equipment kudin yana da yawa rage.Wannan saboda hanyar simintin gyare-gyare ta amfani da takarda na simintin ya fi sauƙi fiye da hanyar shafan simintin gyaran kafa da kuma tsarin calending na bakin karfe dangane da kayan aiki.Bugu da ƙari, takardar saki ya fi rahusa fiye da tef ɗin bakin karfe.
2.Za a iya amfani da takarda na simintin gyare-gyare akai-akai.A cikin kasashen waje, ana iya amfani da shi akai-akai har sau 5 don kera fata na wucin gadi na PVC da sau 10 don kera fata na roba na polyurethane.Tabbas, adadin maimaita amfani yana da alaƙa mai mahimmanci tare da kayan aikin samarwa, ajiya da matakin aiki na masana'antun fata na wucin gadi.
3.It iya canza surface na wucin gadi fata ko roba fata, wanda ba shi yiwuwa a yi da bakin karfe bel.Abin da ake kira "canjin saman" yana nufin cewa takardar sakin da aka yi wa ado na iya canza launin fata daban-daban zuwa saman fata na wucin gadi ko fata na roba, kuma zai iya canza yanayin.Bugu da ƙari, yana iya sa saman ya sami haske daban-daban, daga matt, Semi mai sheki zuwa ultra-high mai sheki.Bugu da ƙari, yana da matukar dacewa don canza ƙwayar fata, ba tare da canza wani kayan aiki ba, kawai canza takarda na saki tare da ƙwayar fata da ake bukata.
4. Yana hana mannewa da fata na wucin gadi ko na roba.An shafe takardan saki da polyvinyl chloride ko polyurethane vinegar.Bayan bushewa, ana iya jujjuya shi don ajiya kuma a cire shi lokacin da ake buƙata.Wannan kuma ba zai yiwu ba tare da sauran masu ɗaukar kaya.
5.Multiyer shafi za a iya za'ayi a kan wannan saki takarda.
6.For wucin gadi fata ko roba fata tare da daban-daban resin formulations, da peeling halaye na saki takarda za a iya gyara da kuma sarrafa.
Muhimman hanyoyin rarrabuwa na takardar sakin fata ta wucin gadi sune kamar haka:
A.A cewar rarrabuwa mai sheki, ana iya raba shi zuwa nau'in haskakawa, nau'in haske, nau'in haske mai haske, nau'in ɓarna, nau'in ɓarna da nau'in ɓarna;
B.Access to shafi kayan, shi za a iya raba silicon tushen takarda da non silicon tushen takarda;
C. Ana iya raba shi zuwa polyvinyl chloride (PVC) takarda fata na wucin gadi da takarda na fata na polyurethane bisa ga rarrabawar amfani;
D. Ana iya raba ta zuwa takarda da ba a yi la'akari da ita ba bisa ga ko akwai ratsi ko babu.
Imel: jeff@cnpolytech.com
Wayar hannu/Whatsapp/Wechat:+86 15280410769
Lokacin aikawa: Nuwamba-23-2022